The Side-Entry Special-Purpose Systems are much faster and prolific. Because of its side placement and stacking axis, it possesses the natural advantage shortening the total travel distance. This systems are equipped with HMI robots and the options for actuator include belt-driven and ball screw.
The core component of in-mold labeling, which design and manufacturing process are complex, contains the years of experience and wisdom of HMI in this area. It is the key factor of yield rate.
The 3rd generation electrostatic guns. No need of central generator. They are able to be independently installed, adjusted, fixed and replaced.
Special vacuum pump using less air and making stronger suction without noise and heat.
After picking up labels, the brushes sweep through the edges of labels for facilitating rolling convergence.
|Example||Cup Lids||Drinking Cups|
|L x W x H|
|IML EOAT||Iron Plate||POM|
|Transmission||Based On Equipped Robot||Based On Equipped Robot|
|Cycle Time||5~9 sec||5~9 sec|
|4.66 L/sec||4.66 L/sec|
|0.6 MPa||0.6 MPa|
|AC 220V||AC 220V|