The Top-Entry Integrated Systems is extremely flexible that it integrates the general robots and extends your current resources. Moreover, when you need to reorganize your capacity, you can just change to the demanded production from in-mold labeling through replacing the end of arm tooling (EOAT).
The core component of in-mold labeling, which design and manufacturing process are complex, contains the years of experience and wisdom of HMI in this area. It is the key factor of yield rate.
The exclusive smile shape label-position-adjusting mechanism. with incredible effectiveness that always makes clients impressed.
The 3rd generation electrostatic guns. No need of central generator. They are able to be independently installed, adjusted, fixed and replaced.
Our new and exclusive brush separator. It is designed for overcoming inferior labels, especially for big size IML.
Special vacuum pump using less air and making stronger suction without noise and heat.
After picking up labels, the brushes sweep through the edges of labels for facilitating rolling convergence.
Examples and Specifications
|Paint Pail Lids||250ml
|L x W x H|
|IML EOAT||Nylon||Iron Plate||POM|
|Transmission||Based On Equipped Robot||Based On Equipped Robot||Based On Equipped Robot|
|Based On Equipped Robot||Based On Equipped Robot||Based On Equipped Robot|
|Cycle Time||20~25 sec||6~10 sec||6~10 sec|
|9.32 L/sec||4.66 L/sec||4.66 L/sec|
|0.6 MPa||0.6 MPa||0.6 MPa|
|AC 220V||AC 220V||AC 220V|